tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no.3, industrial 2nd rd., ping-chen industri al district, taoyuan, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales3@mail.taisaw.com web: www.taisaw.com saw filter 133.2mhz (smd 5.07.0 mm) model no.: TB0816A rev. no. 1.0 a. maximum ratings: 1. operating temperat ure: -40c to 85c 2. storage temperatur e: -40c to 85c 3. input power: 18dbm b. electrical characteristics: 1. ambient temperature: 25 c value characteristics min. typ. max. note center frequency f c mhz - 133.2 - temperature coefficient ppm/c -0.036 insertion loss at fo (including losses in matching circuit) mhz - 4.5 8.0 amplitude ripple variation (fo +/-100khz) db p-p - 0.5 1.0 group delay variation (fo +/-100khz) nsec - 300 1000 relative attenuation dbc fc 250khz ~ fc 400khz fc 400khz ~ fc 600khz fc 600khz ~ fc 800khz fc 800khz ~ fc 3.0mhz fc 3.0mhz ~ fc 7.0mhz fc 7.0mhz ~ fc 30.0mhz 3 15 20 29 35 40 5 16 28 31 42 47 - - - - - - source impedance (single/balanced) ? - 50/200 - load impedance (single/balanced) ? - 50/200 - rohs compliant lead free lead-free soldering
tai-saw technology co., ltd. 3 tst dcc release document c. frequency characteristics : 1. s21 response: (span 60mhz) 2. s21 response: (span 0.8mhz)
tai-saw technology co., ltd. 4 tst dcc release document 3. s11 smith-chart: (span 5mhz) 4. s22 smith-chart: (span 5mhz)
tai-saw technology co., ltd. 5 tst dcc release document d. outline drawing: pin i: rf input or balanced input+ pin j: ground or balanced input- pin d: rf output or balanced output+ pin e: ground or balanced output- pin a, b, c, f, g, h: to be ground : week code (follow the table from planner each year) unit : mm (week01, 02, 03?52 =>a, b, c?z) : product / year code year 2005 2009 2006 2010 2007 2011 2008 2012 product code b b b b 8 1 6
tai-saw technology co., ltd. 6 tst dcc release document e. matching circuit configuration: zin=zout=50 ohm saw filter l1 l2 c1 c2 zin zout id l1=408nh, c1=27pf, l2=408nh, c2=27pf zin=zout=200 ohm saw filter l1 c2 zin zout zin= 200 ohm zout= 200 ohm l4 l3 i j e d c1 l2 l1=l2=280nh, c1=9pf, l3=l4=280nh, c2=9pf
tai-saw technology co., ltd. 7 tst dcc release document f.packing: 1.reel dimension 2.tape dimension direction of feed 8 1 6
tai-saw technology co., ltd. 8 tst dcc release document g. recommended reflow profile:
|
